# ********************************************************
# * Parameter file for post-processing of SPol IHOP data *
# ********************************************************

# General information about this run, mostly for reference
NameOfRun	"KFTG run using 20050516 dataset"
Author		"Frederic Fabry"
ProjectName	"REFRACTT"
Latitude	39.7867
Longitude	-104.546
AvTargetHeight	20.		# Targets are on average at 20 m above P measurement level

# Code version run
DataVersion	"SPol VIRAQ"	# Defines data format of files to be read/processed
SubVersion	""		# Helps for project-specific code
DebugLevel	1		# 0: No message; 1: Terse; 2: Detailed; 3: Full debug
DebugOutputFile	""		# Output file for debug messages.  Use STDOUT if empty.

# Input data files information.  All filenames with full path please.
# Note: "vim" editor often wants to insert carriage returns just before
# very long filenames, screwing things up.  Use the original "\vi"
RealTimeMode	No
RTDataFileName	"/h/guest/fabry/Refract/gndscan.dat" # Input file for real-time data
ResListFile	"/d1/refractt/data/KFTG_calib/calib.file_list"  # Research mode: file list to process; if filename empty, use next two
ResFirstFile    ""
ResLastFile     ""
RefFileName	"/d1/refractt/data/KFTG_calib/n_ref_kftg.dat" # With path: File containing calibration information
FontName        "/home/refractt/src/refractt/n_7x12.fnt"

# Output product files information.  All filenames with full path please.
DestinationPath	"/d1/refractt/data/KFTG_refractt/20050718/destination/" # Destination path for output research files
StatFileName	"/d1/refractt/data/KFTG_refractt/20050718/n_status.txt"	# Status file
UseCircularQ	No		# Save phase data in circular queue (explain)

# Partly output, mostly debug files.  All filenames with full path please.
LatestIQ	"/d1/refractt/data/KFTG_refractt/20050718/debug/target_data.gnd" # I/Q data quality weighted
LatestNPolar	"/d1/refractt/data/KFTG_refractt/20050718/debug/lastdata.gnd"	# Latest output N in polar coord.
LatestNCart	"/d1/refractt/data/KFTG_refractt/20050718/debug/last_xy.gnd"	# And in cartesian coord.
LatestDNPolar	"/d1/refractt/data/KFTG_refractt/20050718/debug/lastdif.gnd"	# Latest output DN (polar)
LatestDNCart	"/d1/refractt/data/KFTG_refractt/20050718/debug/lastd_xy.gnd"	# And in cartesian coord.
McGillOutputN	"/d1/refractt/data/KFTG_refractt/20050718/debug/n_field.dat"	# Latest output N in cartesian-McGill format
TmpFile		"/d1/refractt/data/KFTG_refractt/20050718/debug/n_tmpfile.tmp" # Temporary storage

# Radar and input radar data characteristics
NumAzim		360	# Number of azimuths used in data processing
NumRangeBins	450	# Number of range bins
IQPerAngle	64	# Number of pulses per radial (used for McGill only)
GateSpacing	250.	# m between range gates
Frequency	2.890E9	# Frequency in Hz
PRF		990.	# Radar PRF in Hz (used for McGill only)
BeamWidth	0.93	# Antenna beamwidth (deg) 
FirstRange	650.	# Range of bin 0 (m)
RMin		4	# Min range gate of ground echo. Must be at least 1
AzimFluct	0.4 	# If raw radials are indexed (always EXACTLY at same azimuth), set to 0.
			# Otherwise, set to half the mean angle between raw data azimuths in deg
SwitchEndianIn	No	# Input data uses the same endian convention as this machine

# Output product characteristics
NOutNumAzim	360	# 1 deg. resol for N output (same as input). Best results if matched with input.
NOutNumRanges	450	# .125 km resol for N output. Best results if matched with input.
NSmoothingSideLen 4000.	# Smooth N phases with square of 4-km side length
NErrorThresh	20.	# Display data with N error below this value (should be inversely proportional to NSmoothingSideLen)
DoMapDiff	Yes	# Do N difference map
NumMapDiff	1	# Difference map is a 1-map difference
DNOutNumAzim	360	# 1 deg. resol for DN output. Best results if matched with input.
DNOutNumRanges	450	# .125 km resol for DN. Best results if matched with input.
DNSmoothingSideLen 4000. # Smooth N dif. phases with square of 3-km side length
DNErrorThresh	20.	# But similar requirement on the display
MinConsistency	.015	# Minimum consistency of phase to accept N (DN) measurement (<1)
			# Higher -> Smaller coverage of (hopefully) better data
DoRelax		No	# Skip the relaxation stage

DoCartesianN	No	# Do cartesian map on top of polar
CartesianX	240	# Cartesian map: 240*240...
CartesianY	240
CartesianResol	600.	# ... at 600 m resolution
SwitchEndianOut	No	# Output data uses the same endian convention as this machine

# Real-time/Research display parameters
MinNTrace	250.	# Minimum N shown on time history trace
MaxNTrace	350.	# Maximum N shown on time history trace (best if MinNTrace+100)
DurationHistory	12	# Make it a 12-hr time history (best if 6, 12, 24)
MinNDisplay	235.	# Minimum N displayed on color display
MaxNDisplay	333.	# Maximum N    "      "    "      "
AdaptDisplay	No	# Try to adapt Min & Max N displayed based on situation (not implemented)
NumColors	64	# Number of colors used; use of multiples of 16 preferred.  Range: 8 - 254 (not implemented)
GeogOverlay	""	# No geography overlay file

# Target calibration parameters (mainly for n_calib)
SideLobePow	-90.	# Echoes 90 dB below integrated power are considered to be from sidelobes